One: Material 1. Fabric: walnut, cherry, teak, beech, mahogany and other senior imported veneer (thickness: 0.6mm or more); 2. material: made of imported high density particle board, fiberboard, bending and strong, not easily deformed; 3. Wood: imported teak, walnut, beech, moisture content below 12%, to ensure small deformation, cracking; 4. Paint: German brand "IDOPA" wood paint, in temperature and humidity highly dustproof paint room spray finish. After saturation the most advanced paint technology carefully processed to ensure the table smooth and no particles, bubbles, slag-point, color uniformity; 5. Metal parts: Italian "SH" hinges, Germany "BMB" three rails, locks and Germany "HAFELE", "GLASS" series hardware accessories. II: 1. The wood processing methods dried to a moisture content below 12% or less; 2. the products made of wood Stylist base (white base); 3. Baipi sanding and sealing with Sealer, prevent water exchange with the outside world; 4. spray paint, let it dry before sanding; 5. in constant temperature and humidity, highly dust-proof paint spray paint room, the most advanced technology of well-saturated paint treatment. Three: quality basic requirements 1. mesa formation, flatness 0.006mm, veneer and solid wood edge stitching close, the appearance gap junction less than 0.1mm; 2. line uniform neat, corner over the natural; 3. table smooth, paint-free particles, bubbles, slag, color or even (except wood natural texture); 4. Product stitching with metal connector, the overall look closely, small and uniform gap; 5. whole grain products, timber basically consistent color, natural transition.